2026 LS MT357HC Premium 57 HP Climate-Controlled Cab Utility Tractor (Loader Package) For Sale — Sequim, WA & Olympic Peninsula

The new 2026 LS MT357HC Premium 57 HP Climate-Controlled Cab Utility Tractor (Loader Package) is an industrial-duty, commercial-spec agricultural machine engineered specifically for Pacific Northwest cattle ranches, commercial hay operations, equestrian boarding centers, tree farms, dirt contractors, and municipal maintenance departments. Available now at Leitz Farm Supply & Equipment Sales in Sequim, Washington, this 57 HP powerhouse pairs a high-torque 57.0 gross HP 4-cylinder turbocharged LS CRDI liquid-cooled diesel engine with an advanced Servo-control 3-range hydrostatic transmission (HST) featuring Pedal Link, standard push-button 4WD, a factory climate-controlled luxury cab, dual factory rear remote hydraulic valves (2 pairs / 4 ports), a heavy Category II 3-point hitch with telescopic lower links, and the commercial-grade LS LL4106 Skid Steer Quick-Attach (SSQA) front loader delivering an exceptional 2,680 lb lift capacity.

While typical compact cab tractors in the 50-to-60 HP bracket rely on lightweight aluminum housings, noisy single-circuit pumps, and light bare frames that tip under heavy loader cycles, the LS MT357HC Premium is constructed on a solid structural cast-iron chassis. Weighing 4,343 lbs bare—and scaling over 5,900 lbs completely outfitted with the factory LL4106 loader, 72-inch bucket, and rear fluid ballast—the MT357HC Premium provides the ground-hugging stability, frame rigidness, and low center of gravity required to push through heavy snow drifts, traverse wet sloped pastures, and handle full pallets or double-stacked round bales without chassis flex or front-axle float. Factory-loaded with productivity technology—including the Servo HST with Pedal Link (which automatically synchronizes engine RPM with hydrostatic foot-pedal travel), push-button cruise control, Bluetooth audio, and an ergonomic operator cockpit—the MT357HC Premium delivers commercial-tier loader cycling and effortless four-season comfort. For property managers throughout Clallam, Jefferson, Kitsap, Mason, and Grays Harbor counties, the MT357HC Premium represents the gold standard of 57 HP utility capability. Every tractor package at Leitz Farm Supply includes a comprehensive factory pre-delivery inspection (PDI), 50-point hydraulic check, linkage calibration, fluids topped, and factory-authorized warranty backing from our certified Sequim dealership.

4-Cylinder Turbocharged CRDI Diesel, Servo HST with Pedal Link & Heavy Cast Backbone

• 57.0 Gross HP 4-Cylinder Turbocharged CRDI Diesel Engine: Producing 57.0 gross horsepower and 45.6 continuous PTO horsepower, this EPA Tier 4 Final compliant Common Rail Direct Injection (CRDI) liquid-cooled diesel delivers high low-end torque across the powerband. Engineered for high-draft agricultural work, it easily handles 7-foot heavy-duty rotary cutters, deep rotary tilling, and commercial grading without stalling or losing hydraulic flow.

• Heavy-Duty Servo 3-Range Hydrostatic Transmission (HST): The MT357HC Premium features a full 3-range transmission (Low, Mid, High) operated via intuitive twin side-by-side forward and reverse foot pedals. The Servo-assist mechanism provides effortless pedal feel with zero operator fatigue, allowing feather-light directional modulation and millimeter-accurate positioning around barns, fences, and trailers.

• Pedal Link Automation & Cruise Control: Premium hydrostatic automation built right into the driveline. Engage the Pedal Link system to automatically synchronize engine RPM with hydrostatic pedal movement—revving the engine as the pedal is depressed and throttling down as you let off to optimize fuel economy and reduce cab sound levels. Standard push-button cruise control locks in forward travel speeds across broad pasture expanses.

• Push-Button 4WD, Differential Lock & Wet Multi-Disc Brakes: Electro-hydraulic push-button four-wheel drive paired with a mechanical foot-engaged rear differential lock locks both rear drive wheels simultaneously to claw through thick Olympic Peninsula mud, wet pasture clay, and steep logging roads. Fully enclosed internal wet multi-disc brakes provide reliable, maintenance-free stopping power completely sealed away from grit, mud, and water.

• Dual Hydraulic Pump System (12.5 GPM Total Flow): Built with two dedicated hydraulic circuits—8.2 GPM for implement hydraulics and a separate 4.3 GPM pump for hydrostatic power steering. This dual-pump architecture ensures fast loader cycle times without robbing power or steering responsiveness when maneuvering heavy front-end loads in tight barn alleys.

• Heavy-Duty Cast-Iron Axles & Large Fuel Cell: Solid cast-iron front and rear axle housings, a structural cast clutch housing, and a 12.4-gallon fuel tank allow operators to run full multi-shift commercial workdays and expansive property maintenance chores without stopping for midday fuel refills.

Commercial-Grade LS LL4106 Front-End Loader Specifications

The factory-matched LS LL4106 Front Loader is engineered with heavy structural box-channel lift arms, protected hydraulic hard lines, greaseable pivot pins, an integrated mechanical bucket level indicator, and an armrest-level ergonomic joystick with built-in float mode:

• Maximum Lift Capacity to Pivot Pins: 2,680 lbs (Class-dominating payload capacity in the 57 HP class)

• Maximum Lift Height to Pivot Pins: 94.4 inches (Easily loads high-sided tandem-axle dump trailers and farm flatbeds)

• Breakout Force at Pivot Pins: 4,063 lbs (Tears out packed pit-run gravel, clay, and embedded rock)

• Clearance with Bucket Dumped (45°): 70.8 inches

• Maximum Dump Angle: 54 degrees

• Maximum Rollback Angle: 28 degrees

• Standard Bucket: 72-inch Heavy-Duty Material Bucket with Welded Cutting Edge

• Mounting Standard: Universal Skid Steer Quick-Attach (SSQA) faceplate for one-minute swaps between the standard material bucket, pallet forks, front snow pushers, round bale spears, and hydraulic brush grapples.

Factory-Installed Climate-Controlled Luxury Cab Environment

The MT357HC Premium factory cab is built specifically to handle wet maritime winters and dusty summer field operations:

• Full Acoustic Sound Suppression Cab: Sealed rubber-isolated mounting blocks out exterior noise, engine vibration, exhaust fumes, and moisture, creating a quiet, comfortable operating environment during grueling 12-hour work shifts.

• High-Output HVAC Climate Control: High-capacity heating and air conditioning system with dedicated multi-directional defroster vents along the front windshield and rear glass ensures fog-free visibility in cold, wet Pacific Northwest weather.

• Bluetooth-Ready Audio & Deluxe Seating: Factory-installed Bluetooth stereo radio paired with an adjustable high-back suspension seat with foldable armrests, retractable seatbelt, and operator weight adjustment cushions against terrain shock.

• Panoramic Curved Glass Visibility: Curved panoramic glass panels provide unobstructed sightlines to the front loader bucket corners and rear 3-point implements.

• Complete Lighting & Worksite Hardware: Front and rear pantograph wipers with integrated washer fluid nozzles, opening side-vent windows, dual exterior rear-view mirrors, 12V accessory socket, USB port, cup holder, rubber floor mat, and high-intensity front and rear LED roof work lights illuminate pre-dawn and after-dark operations.

Heavy-Duty Category II 3-Point Hitch & Dual Rear Remote Hydraulics

Out back, the MT357HC Premium provides commercial-tier agricultural lifting muscle and standard factory hydraulic convenience:

• 3-Point Hitch Lift Capacity at Ball Ends: 2,755 lbs (2,469 lbs measured 24 inches behind the pins).

• Category II Geometry with Telescopic Lower Links: Features standard telescopic lower link ends and pin-adjustable telescopic sway stabilizers. Hooking up heavy implements is fast and painless—simply slide the link ends out, pin the implement, and back up to lock them in place without wrestling the tractor.

• Dual Factory Rear Remote Hydraulic Valves: Standard factory-installed 2 pairs / 4 ports of rear hydraulic remotes with detents, saving thousands of dollars in aftermarket installation costs when running hydraulic top-n-tilt kits, log splitters, commercial dump trailers, or box blades with hydraulic scarifiers.

• Independent Rear PTO: Push-button electric-over-hydraulic independent 540 RPM PTO delivering 45.6 continuous PTO horsepower to spin 6-foot or 7-foot heavy-duty rotary cutters (brush hogs), 72-inch reverse-rotation tillers, heavy flail shredders, 12-to-18-inch post-hole augers, and 5-inch commercial wood chippers.

• Position & Draft Control Hydraulics: Precision mechanical lever controls allow the operator to lock in exact implement working depths for smooth, uniform pasture mowing, finish grading, or seedbed preparation.

Key Technical Specifications

Real-World Pacific Northwest Ranch & Commercial Applications

• Winter Snow Removal in Heated Comfort: Clear heavy, wet coastal snow and slush from long private driveways, parking pads, and barn access lanes in t-shirt comfort while high-output defrosters keep panoramic glass clear.

• Heavy Round & Square Hay Bale Handling: Effortlessly lifts, transports, and double-stacks heavy 4x5 round bales or large square bales two-high on trailers using the 2,680 lb loader lift capacity without rear-wheel lift.

• Clearing Overgrown Blackberries & Heavy Brush: Western Washington's maritime climate fuels aggressive brush growth. The 45.6 continuous PTO HP powers a 6-foot or 7-foot heavy-duty rotary cutter (brush hog) or flail mower to shred through dense Scotch broom, Himalayan blackberry thickets, and overgrown pasture grass.

• Driveway, Forest Road & Fire Line Maintenance: Hook up a 7-foot heavy land plane, box scraper, or rear grading blade to re-crown gravel logging roads, scrape away washboard ripples, and pack out wet gravel trails without spinning tires.

• Hog Fuel, Manure & Composting Management: The deep 72-inch bucket easily scoops and carries heaped loads of wet hog fuel, manure, topsoil, and 3/4-minus crushed gravel across muddy paddock terrain.

• Perimeter Fence Building & Storm Cleanup: Use the rear 540 PTO to drill clean post holes with a 12-inch or 18-inch auger, or attach a front SSQA hydraulic root grapple to clear storm blowdowns, downed timber rounds, and heavy brush piles.

Property-Size & Landowner Fit

• 5 to 15 Acres: Delivers commercial-grade earthmoving muscle, round-bale handling capability, and high-volume mowing speed for acreage owners managing challenging timber terrain, long private roads, or steep slopes in year-round cab comfort.

• 15 to 50+ Acres (The Sweet Spot): The primary operating zone for the LS MT357HC Premium. It provides the physical weight, 4-cylinder turbocharged power, Servo HST with Pedal Link, 2,680 lb loader lift, and climate-controlled cab needed to manage commercial hay operations, cattle feedlots, and large-scale pasture clearing week in and week out.

• 50+ Acres & Commercial Ranches: Excellent as a primary utility tractor for hay cutting, baling, feeding, road grading, and manure handling. For expansive multi-hundred-acre field operations, pairing the MT357HC Premium with an 80–100+ HP ag tractor creates an ideal two-tier equipment fleet.

Olympic Peninsula & Western Washington Geographic Relevance

Operating heavy equipment west of the Cascades presents unique challenges: wet clay soils, steep gravel slopes, glacial river rocks, and rapid maritime vegetation growth:

• Sequim & Dungeness Valley: Ideal for commercial hay fields, equestrian boarding facilities, irrigation canal upkeep, and maintaining dry-belt homesteads along the Dungeness River.

• Port Angeles, Joyce & Foothill Ranches: The heavy 5,900+ lb ballasted operating weight, low center of gravity, and 4WD traction provide the necessary hillside stability and drawbar pull to maintain terraced properties and rough timber-fringe acreage.

• Forks, Beaver, Clallam Bay & Neah Bay: In the West End's 100+ inches of annual rainfall, the sealed, heated factory cab keeps the operator dry, warm, and productive through saturated winter conditions without fogged windows or water intrusion.

• Port Townsend, Chimacum & Quilcene: The ideal commercial cab machine for historic East Jefferson County farms, cideries, and livestock operations needing a single platform to run disc mowers, round balers, and large rotary cutters.

• Kitsap, Mason & Grays Harbor Counties (Poulsbo, Silverdale, Bremerton, Shelton, Elma & Aberdeen): Delivers contractor-grade lifting performance and high-capacity gravel hauling for rural homesites, shop construction pads, and forest-thinning cleanups.

Competitive Field Comparisons: 55–60 HP Compact Cab Tractors

Ranchers and contractors evaluating the 55–60 HP compact cab utility tractor market frequently cross-shop the Kubota L6060HSTC, John Deere 4052R / 4066R Cab, Kioti DK5820SE Cab, and Bad Boy 5055 HIL (Cab Option):

• Versus Kubota L6060HSTC: The Kubota L6060 cab tractor is a well-known machine, but the LS MT357HC Premium delivers a higher front-loader lift capacity (2,680 lbs to pivot pins vs. approx. 2,200–2,400 lbs on the LA1055 loader), a standard Bluetooth radio, standard telescoping lower links, and standard dual rear remotes (which cost thousands extra on Kubota).

• Versus John Deere 4052R / 4066R Cab: John Deere uses proprietary loader attachments, fixed lower hitch arms, and charges heavily for basic hydraulic packages. The LS MT357HC Premium comes fully equipped with a solid cast-iron backbone, standard universal SSQA loader mounting, telescopic 3-point links, and standard dual rear remotes.

• Versus Kioti DK5820SE Cab: While Kioti builds a capable cab tractor, the LS MT357HC Premium features a smoother Servo-control hydrostatic transmission with Pedal Link integration, faster cycle times via its 12.5 GPM dual-pump hydraulic system, and a heavier bare chassis build.

• Versus LS MT347H (Open Station): The MT357HC Premium upgrades to a 57 HP turbocharged diesel engine (vs. 47 HP), adds a fully sealed, rubber-isolated HVAC factory cab with front/rear wipers and Bluetooth audio, and incorporates Category II 3-point geometry for larger agricultural implements.

Frequently Asked Questions

What engine powers the LS MT357HC Premium?

The LS MT357HC Premium is powered by a commercial-grade 57.0 HP 4-cylinder turbocharged CRDI liquid-cooled diesel engine producing 45.6 continuous PTO horsepower at 2,600 RPM.

How much can the LS LL4106 front loader lift?

The LS LL4106 front loader boasts a class-dominating 2,680 lb lift capacity at the pivot pins to a maximum height of 94.4 inches, backed by an aggressive 4,063 lb breakout force to dig into packed soil, pit-run gravel, and large round bales.

Does the cab feature heating and air conditioning?

Yes. The factory-installed luxury cab includes high-capacity heating and air conditioning (HVAC) with multi-directional defroster vents along the front windshield and rear glass to eliminate condensation in cold, wet Pacific Northwest weather.

What is the Servo HST with Pedal Link system?

The Servo HST uses hydraulic assistance to make foot-pedal movement feather-light. The integrated Pedal Link system electronically ties hydrostatic pedal movement to the engine throttle, automatically revving the engine as you press forward and throttling down when you release the pedal, saving fuel and reducing operator fatigue.

Does the MT357HC Premium come standard with rear hydraulic remotes?

Yes. The MT357HC Premium includes two pairs (four ports) of factory rear remote valves with detents standard from the factory, ready to operate hydraulic top links, dump trailers, log splitters, or box blades with hydraulic rippers.

What size trailer do I need to haul the MT357HC Premium?

Because the tractor, cab, loader, and ballast weigh over 5,900 to 6,700 lbs, you will need a commercial tandem-axle equipment trailer with at least an 82-inch interior width, 18-to-20-foot length, and a minimum 10,000 lb to 12,000 lb GVWR.

Can Leitz Farm Supply add Rim Guard liquid ballast to the rear tires?

Yes. As an authorized Rim Guard dealer, Leitz Farm Supply installs non-toxic, non-corrosive Rim Guard "Beet Juice" liquid tire ballast directly into the rear tires, adding approximately 800 to 1,000+ lbs of low-center-of-gravity ballast to maximize traction and loader counterbalance.

Dealership Support, Commercial Financing & Flatbed Delivery

At Leitz Farm Supply & Equipment Sales, we support your machinery with factory-trained technicians and comprehensive dealer services:

• Comprehensive Pre-Delivery Inspection (PDI): Every tractor goes through an exhaustive 50-point checklist: HVAC heating and A/C pressures tested, hydraulic pressures verified, loader pins greased, wheel lugs torqued, transmission linkages calibrated, electronics tested, and fluid levels topped.

• Competitive Low-Rate Financing & Cash Discounts: Take advantage of competitive low-rate APR financing programs up to 84 months, flexible terms, or instant cash-in-lieu discounts on approved credit.

• Trade-Ins Welcome: Top-dollar trade valuations for your used Kubota, John Deere, Bad Boy, Kioti, Yanmar, or Mahindra tractor or equipment.

• Certified Service & In-Stock Parts: Full factory-authorized warranty center staffed by factory-trained diesel and hydraulic technicians with genuine LS Tractor filters, hydraulic hoses, and hardware in stock.

• Direct Flatbed Delivery: Scheduled direct flatbed delivery throughout Clallam, Jefferson, Kitsap, Mason, and Grays Harbor counties directly to your property or jobsite.

Visit Leitz Farm Supply & Equipment Sales at 259110 Hwy 101, Sequim, WA 98382 today, or submit an inquiry at LEITZFARMSUPPLY.com to inspect the 2026 LS MT357HC Premium 57 HP Climate-Controlled Cab Utility Tractor in person and reserve yours.